A component/structure to which a full-body fall arrest harness (FBH) is attached to the tree trunk.
A designated area or structure where the user may rest their arms during use.
A combination of two straps and a buckle mechanism. One strap has the buckle mechanism on one end. The other strap feeds through the buckle mechanism. The strap can be pulled through the buckle in one direction (to tighten the strap). To release the strap, the buckle mechanism must be pressed to release pressure on the strap and allows the strap to slide through. Cam buckle straps are used for many purposes including securing a stand or climbing aids to the tree, or securing tree braces/stabilizer bars to the tree, etc.
A treestand that provides both the means to ascend the tree, and allow the user to remain at a desired elevation.
Includes snap hooks, D-rings, carabineers, links, anchorage hardware, and buckles. Any hardware that connects the fall-arrest system components in series, thus creating a linear linkage along which the maximum arrest force (MAF) acts.
Being in a position above ground level.
Every product has an expiration date which is usually shown on the label. When a product has passed its expiration date, the product should be replaced. Sometimes individual components such as ratchet straps can be replaced. Consult the manufacturer’s instruction manual or contact the manufacturer if you have any questions.
A designated area or structure where the user may rest their feet during use.
A full-body fall arrest harness system offered for sale which does not come standard with a treestand. Aftermarket harnesses typically offer more features and potential accessory options over OEM harness systems.
A treestand and/or treestand component manufacturer provided full-body fall arrest harness.
A potential life-saving device which comprises of a system that is assembled for the purpose of arresting an accidental fall of its user. A FAS consists of a full body harness, tether (sometimes referred to as a “lanyard”), anchorage means (i.e., “tree belt”), suspension relief device and in some instances, depending on treestand style, linemen’s or climbing belt.
Component with a design of straps that is fastened about the person in a manner so as to contain the torso and distribute the fall arrest forces over at least the upper thighs, pelvis, chest, and shoulders, with means for attaching it to other components or subsystems.
Being on, or standing on the ground.
A designated area or structure where a user may rest and/or steady their firearm during use.
Device to assist climbing with a climbing treestand. A structure that allows the user to support his weight when lifting a climbing treestand with his legs.
A simple rope or strap that is attached to a treestand or tripod stand on one end and the other end is left hanging to the ground. A haul line is used to raise and lower various equipment from the stand location such as a firearm, backpack, bow, climbing aids, stick ladders, etc.
Any stand that is not made in a standardized and tested manufacturing facility. Homemade Stands are dangerous! Never use a homemade stand or homemade steps for any reason!
A component consisting of a flexible strap, rope, or wire rope for connecting a component such as a FBH directly or indirectly to an anchorage.
That portion of the full-body fall arrest harness which wraps around the legs.
Can be any structure made by man, including: power generation equipment, telephone/power poles, manmade columns or structures. Do not use any stand on or near any manmade structures.
Every product comes with a written set of instructions. These instructions contain critical information on how to safely assemble, install, and use the product. You must keep these instructions the entire time you own the stand and pass it on to others who borrow or purchase the stand. The instructions should be reviewed at least annually.
Every manufacturer has issued warnings related to using their equipment above ground level. These warnings are contained in the manufacturer’s instruction manual and other specific locations, depending upon the type of product.
The maximum force acting on the body at the instant of an arrest of its free fall. Multiple user rated capacity (MUR), the maximum load capacity, not to be exceeded, of a treestand, tripod or tower stand as determined by the manufacturer for simultaneous multiple users.
The maximum load capacity, not to be exceeded, of a treestand, harness, climbing stick, tripod, or tower stand as determined by the manufacturer.
A treestand comprised of two independent sections; an upper “seating” platform and a lower “standing” platform. A strap or rope is attached to both sections to prevent the sections from separating, leaving you stranded. A full-body fall arrest harness system must be worn when using any treestand.
A combination of two straps and a ratchet mechanism that winds the strap through the middle of the ratchet barrel and around itself as you tighten the ratchet. You must have a minimum of two (2) wraps of strapping around the barrel to prevent the strap from slipping. Ratchet straps are used for many purposes including securing a stand or climbing aids to the tree, or securing tree braces/stabilizer bars to the tree.
The maximum load capacity, not to be exceeded, of a treestand, climbing stick, tripod, or tower stand as determined by the manufacturer.
A platform the user sits on when occupying a treestand.
A device that allows the user (without assistance from others) to get safely to the ground after a fall from a treestand while wearing a full-body fall arrest harness system. These devices are controlled either automatically or manually by the user.
A component used to reduce/absorb the energy gained by the user of the FAS when falling.
That portion of the full-body fall arrest harness which wraps over the shoulders.
Can be any device that enables the user to alert others for help. Examples include, but are not limited to, a mobile phone, radio, whistle, signal flare or personal locator device.
Any indication of damage that could be caused by a wide range of things including the outdoor elements, sun, freezing temperatures, aging equipment, animals, tree growth, etc. Some examples are: cracking, torn fibers, looseness, fading, etc.
Any device designed to help stabilize and secure a stand or component to a tree. Examples for treestands are: 1) ratchet straps; 2) cambuckle straps; 3) chains; 4) stabilizer bars; 5) tree braces; etc. Examples for tripod stands are: stakes, stabilizing ropes, and diagonal beams.
A platform the user stands on when occupying a treestand.
Some stands use chains to secure the stand to the tree. The chain typically connects from one side of the stand, around the tree and back to the other side of the stand. Follow the manufacturer’s instructions for installation and use.
Device to allow relief of a person’s weight on the lower extremities if suspended in a harness or allow the user to descend to the ground. The device is to help maintain circulation in the legs and help prevent suspension trauma (blood pooling).
If you hang suspended in a harness, the circulation in your legs will be restricted which causes blood pooling in the legs. Suspension trauma can be fatal! You must get back into your treestand or get back down to the ground as soon as possible. If you cannot, you must use a suspension relief device and do other forms of continuous leg exercises until help arrives.
A strap that connects your harness to the tree belt. The tree belt should be adjusted to eye-level or above when standing and the tether (also sometimes referred to as the “lanyard”) strap should have no slack in the tether when sitting.
The straps, which are integrated with the buttock strap (optional) and are routed from back to front across the groin area or loop around the upper part of the thigh.
The Treestand Manufacturer’s Association (TMA) is a nonprofit trade association that specifically devotes its resources to promoting treestand safety through education. It endeavors to improve treestand safety with the support of its members and also by fostering relationships with organizations having similar goals. Their website address is www.tmastands.org.
Typically a serrated or toothed bar which comes in contact with the tree trunk which mechanically grabs the tree trunk once the cam buckle and/or ratchet straps (i.e., “attachment means”) are installed.
A strap that wraps around the trunk of the tree, from which you attach your tether strap. The tree belt should be adjusted to eye level or above when standing and the tether strap should have no slack in the tether when sitting.
A device designed to support a hunter on an elevated platform that is attached to a tree. treestands are designed to give a hunter an elevated viewpoint advantage while hunting. A full-body fall arrest harness system must be worn when using any treestand.
The consumer or end user of the manufactured product.
A vest that has a Full Body Harness incorporated into the vest. If you use a vest style harness, make sure it meets industry standards recognized by TMA.
That portion of the full-body fall arrest harness which wraps around the waist.